LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Macan GTS >> Repair and Diagnosis >> External Pages >> Different car >> Section 307 (21 - Exhaust Gas Turbocharging -- 911 CARRERA (991)) >> WM 214319 Removing And Installing Charge-Air Cooler (Turbo, Turbo S, Turbo CABRIO, Turbo S CABRIO) >> Installing Charge-Air Cooler

Installing Charge-Air Cooler

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Information 

The procedure for removing and installing is described for one side as an example. The procedure for the other side is practically identical.

  1. Installation is performed in reverse order.
    1. 1.1. Tightening torque for M6 fastening nuts securing charge-air cooler to body:
    2. 1.2. Tightening torque for M6 fastening screws securing charge-air cooler to longitudinal member:
scientia non olet · About LEMON Manuals