LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Macan GTS >> Repair and Diagnosis >> External Pages >> Different car >> Section 306 (30 Clutch, Actuation -- 911 CARRERA (991)) >> WM 303019 Removing And Installing Clutch Slave Cylinder (Except CARRERA "Edition", CARRERA Cabriolet "Edition", Turbo, Turbo S, CARRERA 4 "Edition", Turbo CABRIO, Turbo S CABRIO, CARRERA 4 Cabriolet "Edition", Gt3, Gt3 RS) >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Bleed the clutch hydraulic system. → 300107 BLEEDING THE CLUTCH SYSTEM 
  2. Check operation of the clutch. Repeat the BLEEDING  process if the clutch does not disengage correctly.
  3. Install rear underbody panelling, → 519419 REMOVING AND INSTALLING COVER FOR REAR UNDERBODY
scientia non olet · About LEMON Manuals