Exhaust System
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Exhaust manifold to cylinder head | External Torx screw, M8 x 21 | Tightening torque | 30 Nm (22 ftlb.) | ||
| Exhaust manifold to front silencer | Collar nut, M8 - replace | Tightening torque | 23 Nm (17 ftlb.) | ||
| Console to cylinder head | External Torx screw, M8 x 20 | Tightening torque | 23 Nm (17 ftlb.) | ||
| Holder for rear silencer to cylinder head | External Torx screw, M8 x 20 (4x) | Tightening torque | 23 Nm (17 ftlb.) | ||
| Rear silencer to holder for rear silencer | Collar nut, M8 | Tightening torque | 23 Nm (17 ftlb.) | ||
| Strut to rear silencer | Collar nut, M8 - replace | Tightening torque | 23 Nm (17 ftlb.) | ||
| Clamp | Cheese head bolt, M8 x 50 | Tightening torque | 15 Nm (11 ftlb.) | ||
| Exhaust tailpipe | Clamp can be replaced | Tightening torque | 30 Nm (22 ftlb.) |