LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Macan GTS >> Repair and Diagnosis >> External Pages >> Different car >> Section 299 (66 - Exterior Equipment -- 911 CARRERA (991)) >> WM 663419 Removing And Installing Side Trim Panel (Except CARRERA "Edition", CARR. CABRIO, CARR. S CABRIO, CARRERA Cabriolet "Edition", CARRERA 4 "Edition", CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, CARR. 4 GTS CABRIO, Turbo S CABRIO, CARRERA 4 Cabriolet "Edition") >> Installing Side Trim Panel

Installing Side Trim Panel

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Installation is performed in reverse order to removal.
  2. Slide retaining clip for side-section trim into the bodyshell flange.
    Fig 1: Installing Side Trim Panel
    G09994958Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  3. Check the joint. Screw in outer screws for the wheel housing liner first.
    Location Description Type Basic value Tolerance 1 Tolerance 2
    Fastening screw securing wheel housing liner and side-section trim   Tightening torque 2 Nm (1.5 ftlb.) +/-20 %  
scientia non olet · About LEMON Manuals