LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Macan GTS >> Repair and Diagnosis >> External Pages >> Different car >> Section 132 (40 - Front Wheel Suspension, Drive Shafts -- PANAMERA (970)) >> WM 405755 Replacing Front Wheel Bearing (Except PANAMERA GTS, PANAMERA Turbo S, PANAMERA Platinum Ed., PANAMERA 4 Platinum Ed.) >> Tools And Materials

Tools And Materials

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 Porsche Panamera, 2015 Porsche Panamera, 2014 Porsche Panamera, 2013 Porsche Panamera, and 2012 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Tool overview for wheel bearing

Fig 1: Identifying Tools For Front-Axle Wheel Bearing
G09807417Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. -1-  - T10205/1 grip pieces Attachments T10205  Pressing out wheel hub, position grip pieces behind wheel hub
  2. -2-  - T10205/2 bell Attachments T10205  Pressing out wheel hub, inserting into grip pieces (wheel hub fits through)
  3. -3-  - T10230/9 pipe Assembly fixture T10230  Pressing in wheel bearing, for positioning the wheel carrier
  4. -4-  - Pressure piece VW 454  Pressing out wheel hub, pressing in bond rubber mounting
  5. -5-  - T 10205/10 pressure piece Attachments T10205  Pressing in wheel bearing and wheel hub
  6. -6-  - T 10205/5 pipe Attachments T10205  Pressing out wheel bearing (wheel bearing fits through pipe T10205/5)
  7. -7-  - Large ram for workshop press (70 mm)  Screwing into the workshop press
  8. -8-  - Press-on sleeve 9694/3  Pressing on wheel hub, for positioning the wheel bearing housing with wheel bearing
  9. -9-  - Separating device Nr.111  Pressing inner wheel bearing race off the wheel hub
scientia non olet · About LEMON Manuals