LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Macan GTS >> Repair and Diagnosis >> External Pages >> Different car >> Section 123 (10 - Engine - Crankcase, Suspension -- PANAMERA (970)) >> WM 105219 Removing And Installing Positive Crankcase Ventilation Hose (PANAMERA S E-Hybrid, PANAMERA S Hybrid) >> Installing Positive Crankcase Ventilation Hose

Installing Positive Crankcase Ventilation Hose

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 Porsche Panamera, 2015 Porsche Panamera, 2014 Porsche Panamera, 2013 Porsche Panamera, and 2012 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Information 

For tightening torques, tightening sequence and assembly overview, see → 1001IN TIGHTENING TORQUES, TIGHTENING SEQUENCES, ASSEMBLY OVERVIEWS 

  1. Installation is performed in reverse order. Pay particular attention to the following:
    1. 1.1. Replace O-rings.
    2. 1.2. Attach all tie-wraps at the same places during installation.
scientia non olet · About LEMON Manuals