LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Macan GTS >> Repair and Diagnosis >> External Pages >> Different car >> Section 123 (10 - Engine - Crankcase, Suspension -- PANAMERA (970)) >> WM 105119 Removing And Installing Positive Crankcase Ventilation Valve (PANAMERA, PANAMERA S, PANAMERA S Executive, PANAMERA 4, PANAMERA 4S, PANAMERA 4 S Executive) >> Installing Positive Crankcase Ventilation Valve

Installing Positive Crankcase Ventilation Valve

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 Porsche Panamera, 2015 Porsche Panamera, 2014 Porsche Panamera, 2013 Porsche Panamera, and 2012 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install positive crankcase ventilation valve.
    1. 1.1. Check sealing rings -2-  and replace them if necessary.
    2. 1.2. Position positive crankcase ventilation valve -1-  on the cylinder head cover.
    3. 1.3. Clip in lines -3-  .
    4. 1.4. Screw in and tighten fastening screw -6-  . Tightening torque 10 Nm (7.5 ftlb.)
      Fig 1: Identifying Positive Crankcase Ventilation
      G09804274Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals