LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Macan GTS >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 13 - Engine - CRANKGEAR, Pistons -- (95B) MACAN >> WM 136319 Removing And Installing Drive Plate (MACAN Only) >> Installing Drive Plate

Installing Drive Plate

  1. Use counter-hold tool 10-201  to tighten the screws. → Counter-hold tool on drive plate 
    G11980355

    Counter-hold tool on drive plate 

    NOTE:

    Risk of damage to outer surface of bearing flange on the drive plate.

    • Use a multiple-tooth socket wrench with a shaft length of at least 40 mm to loosen and tighten the screws. 
  2. Fit and tighten new  fastening screws.

    Step 1: Initial tightening 60 Nm (44 ftlb.) 

    Step 2: Final tightening +90° 

scientia non olet · About LEMON Manuals