Technical values -94- Lights, lamps, switches - exterior

Location	Description	Type	Basic value	Tolerance 1
Tilt angle of light/dark limit of dipped beam headlight		Adjustment value	-1 %
Tilt angle of light/dark limit of fog light		Adjustment value	-2 %
Distance between collection box and main headlight	Dimension a	Length	300 mm	+400 mm
Distance between collection box and fog light	Dimension a	Length	300 mm	+400 mm
Tail light to body	Internal Torx screw, M6 x 25	Tightening torque	7.2 Nm (5 ftlb.)
Rear retaining strip to body	Collar nut, M6	Tightening torque	7.2 Nm (5 ftlb.)
Rear retaining strip to front retaining strip	Internal Torx screw, Ø 5 x 16	Tightening torque	2 Nm (1.5 ftlb.)
Tail light to rear lid	Collar nut, M6	Tightening torque	7.2 Nm (5 ftlb.)
Auxiliary headlight to front apron	Internal Torx screw, Ø 5 x 16	Tightening torque	6 Nm (4.5 ftlb.)
Reversing light to rear apron	Internal Torx screw, Ø 5 x 16	Tightening torque	2.3 Nm (1.5 ftlb.)
Fog light to front apron	Internal Torx screw, Ø 5 x 16	Tightening torque	2 Nm (1.5 ftlb.)	+/-0.5 Nm (+/-0.3 ftlb.)
Light bulb control unit to headlight	Internal Torx screw, Ø 4 x 12	Tightening torque	1.5 Nm (1 ftlb.)
Light bulb igniter to headlight	Internal Torx screw, Ø 4 x 12	Tightening torque	1.5 Nm (1 ftlb.)
Headlight to headlight mounting	Hexagon-head bolt, M6 x 20	Tightening torque	8 Nm (6 ftlb.)
Headlight mounting to body	Hexagon socket head bolt, M6 x 30	Tightening torque	9 Nm (6.5 ftlb.)
Seal to headlight	Internal Torx screw, Ø 4 x 12	Tightening torque	2 Nm (1.5 ftlb.)