LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Macan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 804 (21 - Exhaust Gas Turbocharging 4.8L Turbo -- 970 - PANAMERA (970)) >> WM, 219019 Removing And Installing Boost Pressure Sensor >> Installing Boost Pressure Sensor

Installing Boost Pressure Sensor

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 Porsche Panamera, 2015 Porsche Panamera, 2014 Porsche Panamera, 2013 Porsche Panamera, and 2012 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Insert boost pressure sensor into the Y-pipe and install screw.
  2. Connect boost pressure sensor connector -position arrow-  .
    G15198656Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Boost sensor connector

scientia non olet · About LEMON Manuals