LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Macan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 603 (51 - Body Center, Roof, Frame - (95B) MACAN) >> WM 519419 Removing And Installing Cover For Rear Underbody >> Installing Cover For Rear Underbody

Installing Cover For Rear Underbody

WARNING: This page is about a different car, the 2018 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

Installation is performed in reverse order. Pay particular attention to the following: 

  1. Tighten fastening nuts to the specified tightening torque. Tightening torque 2.5 Nm (2 ftlb.)  Torque screwdriver Nr.89 Pos.5
scientia non olet · About LEMON Manuals