LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Macan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 482 (Supercharger Cooling - V6 S/C 3.0L Petrol -- Range Rover/L405) >> Supercharger Cooling - V6 S/C 3.0L Petrol >> Coolant Pump >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page is about a different car, the 2018 Land Rover Range Rover, 2017 Land Rover Range Rover, 2016 Land Rover Range Rover, 2015 Land Rover Range Rover, and 2014 Land Rover Range Rover. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Removal steps in this procedure may contain installation details.
  1. WARNING: Make sure to support the vehicle with axle stands.

    Raise and support the vehicle.

  2. Refer to: COOLING SYSTEM PARTIAL DRAINING, FILLING AND BLEEDING
  3. G11709217

    Torque Specification: 7 Nm 

  4. G11709216
  5. G11709218
  6. G11762783

    Torque Specification: 7 Nm 

  7. CAUTION: Be prepared to collect escaping coolant.
    NOTE: Do not disassemble further if the component is removed for access only.
    G11762784
  8. G11762785
scientia non olet · About LEMON Manuals