LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Macan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 468 (Auxiliary Climate Control - TDV6 3.0L Diesel/TDV8 4.4L Diesel/V6 S/C 3.0L Petrol/V8 N/A 5.0L Petrol/V8 S/C 5.0L Petrol -- Range Rover/L405) >> Auxiliary Climate Control - TDV6 3.0L Diesel / V6 S/C 3.0L Petrol / V8 N/A 5.0L Petrol / V8 S/C 5.0L Petrol >> Auxiliary Thermostatic Expansion Valve >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page is about a different car, the 2018 Land Rover Range Rover and 2017 Land Rover Range Rover. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Removal steps in this procedure may contain installation details.
  1. WARNING: Make sure to support the vehicle with axle stands.

    Raise and support the vehicle.

  2. Disconnect the battery ground cable.

    Refer to: SPECIFICATIONS .

  3. Refer to: AUXILIARY HEATER CORE AND EVAPORATOR CORE HOUSING .
  4. G11701757
  5. CAUTION: Remove and discard the O-ring seals.
    NOTE: Install new O-ring seals.
    G11701758

    Renew Part: Thermostatic expansion valve O-ring seal kit Quantity: 1  .

    Torque Specification: 4 Nm 

  6. CAUTION: Remove and discard the O-ring seals.
    NOTE: Install new O-ring seals.
    G11701759
scientia non olet · About LEMON Manuals