Technical Values
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 Porsche Panamera, 2015 Porsche Panamera, 2014 Porsche Panamera, 2013 Porsche Panamera, and 2012 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Brake calliper to wheel carrier | M12 x 1.5/always use new screws following removal | Tightening torque | 85 Nm (63 ftlb.) | ||
| EPB cable holder to wheel carrier | M6 screw | Tightening torque | 10 Nm (7.5 ftlb.) | ||
| Drive shaft to wheel hub (setting 1) | Setting 1: Before installing the wheel carrier, M22 x 1.5 thread | Tightening torque | 130 Nm (96 ftlb.) | ||
| Drive shaft to wheel hub (setting 2) | Setting 2: With wheel carrier installed, M22 x 1.5 thread | Tightening torque | 460 Nm (340 ftlb.) | ||
| Tie rod to wheel carrier | M12 x 1.5 x 70 thread | Tightening torque | 50 Nm (37 ftlb.) | +60° | |
| Upper control arm (front and rear) to wheel carrier | M12 x 1.5 thread | Tightening torque | 50 Nm (37 ftlb.) | +60° |