LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Macan Base >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> 21 - Exhaust Gas Turbocharging -- (95B) MACAN >> WM 214119 Removing And Installing Pressure Pipe (MACAN Only) >> Installing Pressure Pipe

Installing Pressure Pipe

  1. Install pressure pipe.
    1. 1.1. Secure line -4-  to the pressure pipe. -3- 
    2. 1.2. Position pressure pipe -2-  and screw on fastening nuts -1-  .
    3. 1.3. Tighten fastening nuts. Tightening torque 9 Nm (6.5 ftlb.) 
      G11978187

      Pressure pipe on body 

  2. Fit pressure hose -1-  and tighten screw-type clamp -2-  . Tightening torque 5.5 Nm (4 ftlb.) 
    G11978188

    Pressure hose at bottom of pressure pipe 

  3. Connect electric plug connection -1-  for the pressure sensor and secure the cable.
    G11978189

    Removing and installing pressure sensor 

  4. Fit pressure hose -1-  and tighten screw-type clamp -2-  . Tightening torque 5.5 Nm (4 ftlb.) 
    G11978190

    Pressure hose at top of pressure pipe 

scientia non olet · About LEMON Manuals