Removing lower trailing arm

Lower trailing arm 

1. Unscrew and remove fastening screw -2-  on the level sensor -1-. 

   Mounting for level sensor 

2. Unscrew and remove fastening screw -4-  on the connecting link.

   Mounting for connecting link 

3. Loosen lower trailing arm on the wheel bearing housing.

   Mounting for trailing arm on wheel bearing housing 

   1. 3.1. Screw off nut -3-. 
   2. 3.2. Remove fastening screw -1-  .
   3. 3.3. Remove spacer tube -2-  .
4. Loosen lower trailing arm on the chassis subframe.

   Mounting for trailing arm on chassis subframe 

   1. 4.1. Unscrew and remove fastening screw -1-  .
   2. 4.2. Unscrew nut -3-  and remove fastening screw -2-  .
5. Remove lower trailing arm.