LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Macan Base >> Repair and Diagnosis >> Drivelines & Axles >> Wheel Hubs >> 42 Rear Wheel Suspension, Drive Shaft -- (95B) MACAN >> WM 420519 Removing And Installing Rear Axle Housing >> Technical values

Technical values

Location Description Type Basic value Tolerance 1 Tolerance 2
Rear axle housing, front to body M14 x 1.5 x 135 thread/always replace screws following removal Initial tightening 115 Nm (85 ftlb.)    
Rear axle housing, front to body M14 x 1.5 x 135 thread/always replace screws following removal Final tightening +90°    
Rear axle housing, rear to body M12 x 1.5 x 145 thread/always replace screws following removal Initial tightening 115 Nm (85 ftlb.)    
Rear axle housing, rear to body M12 x 1.5 x 145 thread/always replace screws following removal Final tightening +90°    
Shock absorber to wheel bearing housing M14 x 1.5 x 90 thread/always use new screw or bolt following removal Initial tightening 150 Nm (111 ftlb.)    
Shock absorber to wheel bearing housing M14 x 1.5 x 90 thread/always use new screw or bolt following removal Final tightening +180°    
scientia non olet · About LEMON Manuals