No Identifiable Deformations On The Body Structure

1. Check seam joining line on the accessories

   → WM 5X00IN GAP DIMENSIONS 

2. Check accessories for paint abrasion (accessories that were impacted during the crash)
3. Drive the vehicle onto a lifting platform and raise it. Measure screw points using an electronic measuring system (e.g. Measuring unit, professional WE 1397  ) and compare with the required values.
4. Determine the extent of any damage to chassis components

   Measure the chassis electronically if necessary

5. Decide whether the vehicle has to be repaired

Repair the vehicle, if necessary.