| Brake calliper (18-inch - red/silver) to wheel carrier |
M14 x 1.5 x 114 thread/always use new screws following removal |
Initial tightening |
30 Nm (22 ftlb.) |
|
|
| Brake calliper (18-inch - red/silver) to wheel carrier |
M14 x 1.5 x 114 thread/always use new screws following removal |
Final tightening |
+90° |
|
|
| Brake calliper (17-inch - black) to wheel carrier |
M14 x 1.5 x 48 thread/always use new screws following removal |
Tightening torque |
196 Nm (145 ftlb.) |
|
|
| Brake calliper (PCCB) to wheel carrier |
M14 x 1.5 x 135 thread/always use new screws following removal |
Initial tightening |
30 Nm (22 ftlb.) |
|
|
| Brake calliper (PCCB) to wheel carrier |
M14 x 1.5 x 135 thread/always use new screws following removal |
Final tightening |
+90° |
|
|
| Brake hose bracket to wheel carrier |
M6 x 16 thread |
Tightening torque |
10 Nm (7.5 ftlb.) |
|
|
| Brake hose to brake calliper (grey cast iron) |
|
Tightening torque |
20 Nm (15 ftlb.) |
|
|
| Brake hose to brake calliper (PCCB) |
|
Tightening torque |
14 Nm (10.5 ftlb.) |
|
|