Securing Padding For Rear Backrest

Information 

• Always replace metal cushion clips  .
• Reuse plastic cushion clips. Replace defective cushion clips  .

1. Align cover -1-  over the padding for the rear backrest -arrows-  .

   Aligning cover 

2. For vehicles with heated seats:  Connect electric plug connection for heated seats.
3. Fasten cushion clips.

Secure the metal struts in the cover -1-  using cushion clip pliers Nr.130  in the sequence shown (-arrow A to arrow I-  ) to the metal struts of the padding -2-  .

Fastening cushion clips