LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Macan Base >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> 63 Bumpers -- (95B) MACAN >> WM 635619 Removing And Installing Rear Panel (Except MACAN Sport Edition) >> Installing Rear Panel

Installing Rear Panel

NOTE:
  • Check that the fixing clips are not bent or broken.
  • Check that all fixing clips are positioned fully and correctly.
  • Replace damaged or missing clips with new ones.

Installation is performed in reverse order. Pay particular attention to the following:

  1. Tighten fastening screws on underbody to the specified tightening torque. Tightening torque 2 Nm (1.5 ftlb.) Torque screwdriver Nr.89 Pos.5 
scientia non olet · About LEMON Manuals