Removing Front Retaining Strip
NOTE:
- The number of fastening screws, fixing clips, plug connections, holders and trim panels can vary depending on equipment .
- The illustrations for removing and installing the drive mechanism are shown only on one equipment variant and may differ from the actual equipment variant .
- Some steps must be carried out automatically .
- Some of the repair illustrations show only one side of the vehicle .
- Lift up rubber headlight seal -1- at the front.
- Unscrew fastening screws -2, 3- .
- Lift front headlight up slightly, carefully guide out retaining strip -4- close to the headlight -arrow- and remove it.
Right retaining strip at the front