Removing Rear Closing Panel

Fig 1: Rear Closing Panel Component Location

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Information 

Loosen connection points on one side only. Do not damage the sheet-metal panel underneath.

1. Drill out spotwelds using spotweld drill; see Gr. 2.4; Workshop Equipment Manual Nr.129  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

2. Heat the marked bonding surfaces.
   1. 2.1. Removing rear closing panel

      Courtesy of PORSCHE CARS NORTH AMERICA, INC.