Technical Values
TORQUE SPECIFICATION
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Fastening screws for guide wedge | Item 1 | Tightening torque | 8 Nm (6 ft. lb.) | ||
| Fastening screw for guide wedge (retrofitted) | Item 1 | Tightening torque | 8 Nm (6 ft. lb.) | ||
| Fastening screw for outer wing | Tightening torque | 10 Nm (7.5 ft. lb.) | |||
| Fastening screw for inner wing | Tightening torque | 10 Nm (7.5 ft. lb.) | |||