LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Macan Base >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> 94 Lights, Lamps, Switches, Exterior -- (95B) MACAN >> WM 945719 Removing And Installing Light Bulb Control Unit (Except MACAN Sport Edition) >> Installing Light Bulb Control Unit

Installing Light Bulb Control Unit

NOTE: Always comply with the regulations for handling ESD-sensitive components!
  • Always wear approved work clothes and shoes when carrying out assembly work  .
  • Do not remove new parts from ESD (electrostatic discharge) protective packaging until shortly before installation  .
  • Do not touch electric pins and plug contacts  .
  1. Check that the seal -1-  is fitted correctly on the light bulb control unit -2-  .
  2. Carefully insert light bulb control unit into the headlight.
  3. Tighten fastening screws -3-.
    G11984687

    Installing light bulb control unit 

scientia non olet · About LEMON Manuals