LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Macan Base >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> 94 Lights, Lamps, Switches, Exterior -- (95B) MACAN >> WM 943119 Removing And Installing Tail Light In Rear Lid (Except MACAN Sport Edition) >> Installing Tail Light In Rear Lid

Installing Tail Light In Rear Lid

  1. If the threaded bolt in the tail light has become loose during removal, it must be bonded into the tail light before installation.
    1. 1.1. Remove threaded bolt from tail light.
    2. 1.2. Clean the threaded bolt and thread in the tail light.
    3. 1.3. Coat threaded bolt with a thin layer of Scotchweld DP 490  .
    4. 1.4. Install threaded bolt in the tail light.
      G11984667

      Bonding in threaded bolt 

  2. The tail light is installed in reverse order to removal.
  3. Tighten fastening nuts. → Tightening torque: 7.2 Nm (5.1 ftlb.) 
scientia non olet · About LEMON Manuals