LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Cayenne Turbo >> Repair and Diagnosis >> Suspension >> Electronic Suspension >> 43 - Leveling System, Air Suspension, Damper Control (4.8L Turbo) -- 92A - Cayenne (92A) >> WM, 433019 Removing And Installing Front Spring Strut (Air Springs) >> Subsequent Work >> Subsequent Work For Left Spring Strut (Air Springs)

Subsequent Work For Left Spring Strut (Air Springs)

  1. Vehicles with PDCC:

    Secure holder for PDCC reservoir at the threaded joints -1, 2-  at the left of the engine compartment. > Tightening torque 10 Nm (7.4 ftlb.) 

    G16318798Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Holder for PDCC reservoir, cable guide

  2. Tighten PDCC reservoir at the fastening nut. > Tightening torque 10 Nm (7.4 ftlb.) 
  3. Fit drive shaft.

    > 404119 REMOVING AND INSTALLING FRONT DRIVE SHAFT

  4. Fit the relevant side engine compartment trim panel.

    > WM 700219 REMOVING AND INSTALLING FRONT TRIM PANEL (ENGINE COMPARTMENT) (CAYENNE, CAYENNE GTS, CAYENNE TURBO S, CAYENNE S, CAYENNE S E-HYBRID, CAYENNE TURBO, CAYENNE S DIESEL, CAYENNE (3.0))

  5. To fill the air suspension (the system must be filled with compressed air), use the Porsche System Tester.

    > 4301IN FILLING SPECIFICATION FOR AIR-SPRING STRUT 

  6. Switch on the levelling system

    > LIFTING THE VEHICLE