Removing Compressor For Levelling System

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Installation position of compressor for the levelling system

1. Release electric plug connections -1-  (-a-  ) and pull them off -A-  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Disconnecting connectors on compressor

2. Remove front hoses at the compressor.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Removing front hoses

   1. 2.1 Use > T10212 - insert part to screw off the union nut -1-  .
   2. 2.2 Pull off pressure hose -2-  .
   3. 2.3 Release sleeve on the suction hose -3-  using a screwdriver -A-  .
   4. 2.4 Pull off suction hose -3-  (-B-  ).
3. Remove five pressure hoses -2-  at the valve block. The blue pressure hose at the top left can remain in place.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Removing pressure hoses

   1. 3.1 Use > T10212 - insert part to screw off the union nuts -1-  .
   2. 3.2 Pull off pressure hoses -2-  .
4. Unscrew fastening screws -1-  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Removing compressor

5. Remove compressor -2-  in a downward direction.