Installing Compressor For Levelling System
- Installation is performed in reverse order.
Observe specified tightening torques:
Compressor to body: > Tightening torque 20 Nm (14.8 ftlb.)
Pressure hose to valve block: > Tightening torque 4 Nm (3 ftlb.)
Observe specified tightening torques:
Compressor to body: > Tightening torque 20 Nm (14.8 ftlb.)
Pressure hose to valve block: > Tightening torque 4 Nm (3 ftlb.)