Preliminary Work (PDCC)

NOTE: NOTIFICATION
Risk of material damage if too much Pentosin is used or if Pentosin gets onto the coolant hoses when filling or topping up.

Observe the following specifications in order to avoid overfilling and thus overflowing.
Before checking the fluid level, run the engine for approx. 20 seconds. Multiple steering operations (maneuvering) will change the fluid level in the reservoir! Check the fluid level.
If coolant hoses come into contact with Pentosin, clean them thoroughly with water IMMEDIATELY.
Replace visibly swollen coolant hoses.

Remove front trim panel (engine compartment) at the left.
> WM 700219 REMOVING AND INSTALLING FRONT TRIM PANEL (ENGINE COMPARTMENT) (CAYENNE, CAYENNE GTS, CAYENNE TURBO S, CAYENNE S, CAYENNE S E-HYBRID, CAYENNE TURBO, CAYENNE S DIESEL, CAYENNE (3.0))
Remove pressure pipe at the left.
> Refer to the appropriate service information
Remove intake manifold at the left.
> Refer to the appropriate service information
Remove front left wheel.
> 440519 REMOVING AND INSTALLING WHEEL
Remove air cleaner housing at the left.
> 242519 REMOVING AND INSTALLING AIR CLEANER HOUSING