Preliminary Work For Removing And Installing Reservoir

Information 

If the steering system needs to be flushed (e.g. after replacing components), see >> Flushing the steering system <<.

>489729 FLUSHING THE STEERING SYSTEM 

• A hose (shop-made) must be prepared for this purpose. 

1. Remove front trim panel (engine compartment).

   > WM 700219 REMOVING AND INSTALLING FRONT TRIM PANEL (ENGINE COMPARTMENT) (CAYENNE, CAYENNE GTS, CAYENNE TURBO S, CAYENNE S, CAYENNE S E-HYBRID, CAYENNE TURBO, CAYENNE S DIESEL, CAYENNE (3.0))