Technical Values
TIGHTENING TORQUE SPECIFICATIONS
| Location | Des... | Type | Basic val... | Toleranc... | Toleranc... |
|---|---|---|---|---|---|
| No. 2: Threaded connection securing tie rod to pivot bearing | M14 x 1.5 thread (always replace screws and lock nuts after removal) | Tightening torque | 90 (67 ftlb.) Nm | ||
| No. 5: Threaded connection securing axial joint to steering rack | M18 x 1.5 thread, axial joint | Tightening torque | 100 (74 ftlb.) Nm | + 10° | |
| No. 8: Heat shield to steering gear | M6 x 16 thread | Tightening torque | 10 (7.5 ftlb.) Nm |