LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Cayenne Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 92 (47 - Brakes- Brake Hydraulic System, Regulator, Booster (4.8L Non Turbo) -- 92A - Cayenne (92A)) >> WM, 473919 Removing And Installing Front Brake CALLIPER >> Subsequent Work

Subsequent Work

WARNING: This page is about a different car, the 2014 Porsche Cayenne, 2013 Porsche Cayenne, 2012 Porsche Cayenne, and 2011 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Bleed the brake system.

    > 470107 BLEEDING THE BRAKE SYSTEM  - section on "Bleeding"

  2. Position disc brake pads by operating the brake several times.
  3. If new brake pads are fitted, read the information under "Removing and installing brake pads"

    > 463619 REMOVING AND INSTALLING FRONT BRAKE PADS

  4. Fit the wheel. Use assembly aids (assembly pins) -1-  .

    > 440519 REMOVING AND INSTALLING WHEEL

    G16330515Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Brake disc and calliper (shown as an example)