LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Cayenne Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 91 (4X Chassis - General (4.8L Non Turbo) -- 92A - Cayenne (92A)) >> WM, 4X00IN Tightening Torques For Front Axle >> Technical Values >> Drive Shaft

Drive Shaft

WARNING: This page is about a different car, the 2014 Porsche Cayenne, 2013 Porsche Cayenne, 2012 Porsche Cayenne, and 2011 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS

Location Description Type Basic value Tolerance
Threaded connection securing drive shaft to front-axle transmission flange Item 1: M10 thread Initial tightening 50 (37 ftlb.) Nm  
Threaded connection securing drive shaft to front-axle transmission flange Item 1: M10 thread Final tightening + 90°  
Threaded connection securing drive shaft to front-axle transmission flange Item 1: M8 thread Initial tightening 20 (15 ftlb.) Nm  
Threaded connection securing drive shaft to front-axle transmission flange Item 1: M8 thread Final tightening + 90°  
Threaded connection for securing drive shaft to wheel hub Item.2: M24 x 1.5 thread (always replace screws and lock nuts after removal); grease friction surface of the nut with aluminium paste (do not grease the thread!) Tightening torque 460 (340 ftlb.) Nm  
G16330870Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Drive shaft, shown as an example

scientia non olet · About LEMON Manuals