Brake Calliper/Brake Lines/Vacuum Pump
WARNING: This page is about a different car, the 2014 Porsche Cayenne, 2013 Porsche Cayenne, 2012 Porsche Cayenne, and 2011 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS
| Location | Description | Type | Basic value | Tolerance |
|---|---|---|---|---|
| Threaded connection securing brake calliper to front-axle 18-inch wheel carrier | M14 x 1.5 x 115 thread (always replace screws and lock nuts after removal) | Tightening torque | 140 Nm (104 ftlb.) | |
| Threaded connection securing brake calliper to front-axle 19-inch wheel carrier and PCCB | M14 x 1.5 x 135 thread (always replace screws and lock nuts after removal) | Tightening torque | 140 Nm (104 ftlb.) | |
| Connecting line to brake calliper | M10 x 1 thread | Tightening torque | 14 Nm (9.5 ftlb.) | +/- 1 Nm (0.5 ftlb.) |
| Threaded connection securing brake calliper to rear-axle wheel carrier HA | M12 x 1.5 x 115 thread (always replace screws and lock nuts after removal) | Tightening torque | 85 Nm (63 ftlb.) | |
| Bleeder screw on brake calliper | M10 x 1 thread | Tightening torque | 14 Nm (10.5 ftlb.) | +/- 2 Nm (1.5 ftlb.) |
| Brake pressure pipe to brake calliper | M10 x 1 thread | Tightening torque | 14 Nm (10.5 ftlb.) | +/- 1 Nm (0.5 ftlb.) |
| Cap screws for brake lines | M10 x 1 thread | Tightening torque | 14 Nm (10.5 ftlb.) | +/- 1 Nm (0.5 ftlb.) |
| Mount for intermediate piece | M6 x 14 thread | Tightening torque | 10 Nm (7.5 ftlb.) | |
| Vacuum pump (electric) | Tightening torque | 10 Nm (7.5 ftlb.) | +/- 1 Nm (0.5 ftlb.) | |
| Vacuum pump (mechanical) | M6 x 25 thread | Tightening torque | 10 Nm (7.5 ftlb.) | +/- 1 Nm (0.5 ftlb.) |