LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Cayenne Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 88 (46 - Brakes - Brake Mechanism (4.8L Non Turbo) -- 92A - Cayenne (92A)) >> WM, 468519 Removing And Installing Spreader Device (EPB) >> Preliminary Work >> Preliminary Work For Removing And Installing Spreader Device (Epb)

Preliminary Work For Removing And Installing Spreader Device (Epb)

WARNING: This page is about a different car, the 2014 Porsche Cayenne, 2013 Porsche Cayenne, 2012 Porsche Cayenne, and 2011 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the wheel.

    > 440519 Removing and installing wheel - section on "REMOVING "

  2. Move electric parking brake (EPB) into >>installation position<< using the Porsche System Tester. To do this, select >>Parking brake<< in the control unit overview. Select >>Drive link tests<<>>All<<>>Move to installation position<<.
  3. Remove brake calliper and hang it at a suitable place in the wheel arch.

    > 474119 Removing and installing rear brake calliper - section on "REMOVING "

  4. Remove brake disc.

    > 465419 Removing and installing rear brake disc (PCCB) - section on "REMOVING "

  5. Remove brake shoes.

    > 468356 Replacing brake shoes - section on "REMOVING "

scientia non olet · About LEMON Manuals