LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Cayenne Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 88 (46 - Brakes - Brake Mechanism (4.8L Non Turbo) -- 92A - Cayenne (92A)) >> WM, 468356 Replacing Brake Shoes >> Subsequent Work

Subsequent Work

WARNING: This page is about a different car, the 2014 Porsche Cayenne, 2013 Porsche Cayenne, 2012 Porsche Cayenne, and 2011 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install brake disc.

    >465319 REMOVING AND INSTALLING REAR BRAKE DISC 

    Information 

    If new brake discs and/or new brake shoes are installed on the vehicle, they must be worn in before calibration (not PCCB!).

    > WM, 468350 GRINDING DOWN PARKING-BRAKE SHOES (EPB) 

    If a new actuator was installed, it must be confirmed in the Porsche System Tester.

    • >>Control unit overview<<>>Parking brake<<>>Drive links/Tests<<>>Confirm actuator replacement<<.
  2. Adjust and calibrate the parking-brake shoes.

    >468316 ADJUSTING AND CALIBRATING PARKING-BRAKE SHOES 

    Grind down the parking-brake shoes during adjustment and calibration if necessary.

    > WM, 468350 GRINDING DOWN PARKING-BRAKE SHOES (EPB)