LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Cayenne Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 88 (46 - Brakes - Brake Mechanism (4.8L Non Turbo) -- 92A - Cayenne (92A)) >> WM, 465319 Removing And Installing Rear Brake Disc >> Subsequent Work

Subsequent Work

WARNING: This page is about a different car, the 2014 Porsche Cayenne, 2013 Porsche Cayenne, 2012 Porsche Cayenne, and 2011 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Information 

When replacing the brake discs and/or brake shoes, the brake shoes for the electronic parking brake (EPB) must be grinded down. The routine is initiated using the Porsche System Tester.

> WM, 468350 GRINDING DOWN PARKING-BRAKE SHOES (EPB) 

It is not necessary to grind down the brake discs if you are simply removing/installing the brake discs.

  1. Adjust and calibrate the parking-brake shoes.

    >468316 ADJUSTING AND CALIBRATING PARKING-BRAKE SHOES 

    Grind down the parking-brake shoes during adjustment and calibration if necessary.

    > WM, 468350 GRINDING DOWN PARKING-BRAKE SHOES (EPB)