LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Cayenne Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 88 (46 - Brakes - Brake Mechanism (4.8L Non Turbo) -- 92A - Cayenne (92A)) >> WM, 465119 Removing And Installing Front PCCB Brake Disc >> Information >> Explanation Of Two-Part Brake Disc

Explanation Of Two-Part Brake Disc

WARNING: This page is about a different car, the 2014 Porsche Cayenne, 2013 Porsche Cayenne, 2012 Porsche Cayenne, and 2011 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. The PCCB brake discs consist of two parts on the front and rear axles. The brake disc -1- is screwed to the brake-disc chamber -2- with screws (M6) -3-.
    G16330367Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Illustration shows example

    G16330368Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Two-part brake disc (shown as an example)

  2. Only the complete brake disc is available as a spare part (disc + brake-disc chamber)!
  3. Do not separate the brake-disc chamber -2- and brake disc -1-. In addition, the screws -3- must not be turned and should not need to be turned. The screws are prevented from turning by compression in the bushing.
  4. It is essential that the tightening torque of the screws is not changed (do not turn the screws) as this can have a negative effect on the sound behavior.
1 Brake disc
2 Brake-disc chamber
3 Screw
scientia non olet · About LEMON Manuals