LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Cayenne Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 87 (42 - Rear Wheel Suspension Drive Shaft (4.8L Non Turbo) -- 92A - Cayenne (92A)) >> WM, 425855 Replacing Rear Wheel Bearing >> Subsequent Work >> Subsequent Work For Replacing Rear Wheel Bearing

Subsequent Work For Replacing Rear Wheel Bearing

WARNING: This page is about a different car, the 2014 Porsche Cayenne, 2013 Porsche Cayenne, 2012 Porsche Cayenne, and 2011 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fit wheel bearing housing.

    > 425219 REMOVING AND INSTALLING WHEEL BEARING HOUSING  - section on "Installing"

  2. Fit wheel.

    > 440519 Removing and installing wheel - section on "INSTALLING "

  3. Perform suspension alignment.

    > 449503 SUSPENSION ALIGNMENT, COMPLETE

  4. Fit hub cap.
scientia non olet · About LEMON Manuals