LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Cayenne Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 87 (42 - Rear Wheel Suspension Drive Shaft (4.8L Non Turbo) -- 92A - Cayenne (92A)) >> WM, 420855 Bearings For Rear Axle >> Preliminary Work

Preliminary Work

WARNING: This page is about a different car, the 2014 Porsche Cayenne, 2013 Porsche Cayenne, 2012 Porsche Cayenne, and 2011 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Switch off the levelling system.

    > WM, 4X00IN LIFTING THE VEHICLE

    On vehicles with Porsche Dynamic Chassis Control (PDCC), the system is fully depressurised when the engine is not running.

  2. Lift the vehicle.

    > WM, 4X00IN LIFTING THE VEHICLE

  3. For front rear-axle chassis subframe bearings: Remove stone guard.
  4. Remove rear silencer.

    > 263355 REPLACING REAR SILENCER