Component Overview
WARNING: This page is about a different car, the 2014 Porsche Cayenne, 2013 Porsche Cayenne, 2012 Porsche Cayenne, and 2011 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
The steel springs are not relevant for the Cayenne Turbo.
Standard Cayenne Turbo equipment: Air springs with levelling system and height adjustment.
Steel spring strut, complete, FA steel spring
Exploded view of steel spring strut, FA steel spring
| No. | Designation | Note |
|---|---|---|
| -1- | Connector housing | Only for PASM (Porsche Active Suspension Management). |
| -2- | Grommet (connector) | Only for PASM. |
| -3- | Grommet (cable) | Only for PASM. |
| -4- | Hexagon nut (3x) | Please use new hexagon nuts. |
| -5- | Ring | |
| -6- | Cap | Not for PASM. |
| -7- | Lock nut | Please use a new lock nut. |
| -8- | Concave support Supporting mount |
Concave support and supporting mount are a complete unit and cannot be disassembled. |
| -9- | Top support | Fit together at the correct position with top support. (Align triangular markings all around). |
| -10- | Top base | Fit together at the correct position with top support. (Align triangular markings all around). |
| -11- | Boot | |
| -12- | Rubber stop | Allocation of rubber stop as per Spare Parts Information. |
| -13- | Cap | Allocation of cap as per Spare Parts Information. |
| -14- | Coil spring | Allocation of coil spring as per Spare Parts Information. |
| -15- | Bottom base | Fit together at the correct position with bottom support. (Align triangular markings all around). |
| -16- | Bottom support | Fit together at the correct position with bottom support. (Align triangular markings all around). |
| -17- | Spacer | Number of spacers depends on the tolerance class (0 spacers, 1 spacer or 2 spacers). The number depends on the number of grey dots on the coil spring. |
| -18- | Concave washer | |
| -19- | Shock absorber | Allocation of shock absorber as per Spare Parts Information. |