Subsequent Work For Removing And Installing Spring Strut (Steel Springs) On Passenger's Side
WARNING: This page is about a different car, the 2014 Porsche Cayenne, 2013 Porsche Cayenne, 2012 Porsche Cayenne, and 2011 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
- Install torque support.
> 103719 Removing and installing torque support - section on "INSTALLING "
- Clip in bleeder valve -1-
at the coolant reservoir.
Clipping in wire harness at right of engine compartment
- Clip plug connections -2, 3- into the holders at the end plate.