LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Cayenne Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 86 (40 - Wheel Suspension Front Drive Shaft (4.8L Non Turbo) -- 92A - Cayenne (92A)) >> WM, 408519 Removing And Installing Front Spring Strut (Steel Springs) >> Preliminary Work >> Removing And Installing Front Spring Strut (Steel Springs)

Removing And Installing Front Spring Strut (Steel Springs)

WARNING: This page is about a different car, the 2014 Porsche Cayenne, 2013 Porsche Cayenne, 2012 Porsche Cayenne, and 2011 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the relevant side engine compartment trim.

    > 700219 REMOVING AND INSTALLING FRONT TRIM PANEL (ENGINE COMPARTMENT) - section on "Removing"

  2. Before raising the vehicle, loosen the drive shaft mounting at the wheel side. Operate the brake whist doing so (a second mechanic is required).

    > 404119 Removing and installing front drive shaft - section on "REMOVING "

  3. Remove the drive shaft.

    > 404119 Removing and installing front drive shaft - section on "REMOVING "

scientia non olet · About LEMON Manuals