LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Cayenne Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 86 (40 - Wheel Suspension Front Drive Shaft (4.8L Non Turbo) -- 92A - Cayenne (92A)) >> WM, 408519 Removing And Installing Front Spring Strut (Steel Springs) >> Preliminary Work >> Preliminary Work For Removing And Installing Front Spring Strut (Steel Springs) On Driver's Side

Preliminary Work For Removing And Installing Front Spring Strut (Steel Springs) On Driver's Side

WARNING: This page is about a different car, the 2014 Porsche Cayenne, 2013 Porsche Cayenne, 2012 Porsche Cayenne, and 2011 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Vehicles with PDCC:

    Loosen PDCC reservoir at the fastening nut and set it aside.

    > 430955 REPLACING RESERVOIR (PDCC)

  2. Loosen and remove holder for PDCC reservoir at the threaded joints -1, 2-  at the left of the engine compartment.
G16329456Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Holder for PDCC reservoir, cable guide