LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Cayenne Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 86 (40 - Wheel Suspension Front Drive Shaft (4.8L Non Turbo) -- 92A - Cayenne (92A)) >> WM, 407719 Removing And Installing Anti-Roll Bar >> Removing Anti-Roll Bar

Removing Anti-Roll Bar

WARNING: This page is about a different car, the 2014 Porsche Cayenne, 2013 Porsche Cayenne, 2012 Porsche Cayenne, and 2011 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Information 

The pictures shown in this document may differ from the original.

  1. If installed:  Remove the fastening screws on the air guide -8-  at the left and right. Use a suitable tool to counter the fastening nuts -9-. 
    G16329432Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Removing air guide

  2. Remove connecting link at the left and right of the anti-roll bar.
  3. Unscrew and remove the four fastening screws on the anti-roll bar and remove the clips.
  4. Carefully pull out the anti-roll bar.