LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Cayenne Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 86 (40 - Wheel Suspension Front Drive Shaft (4.8L Non Turbo) -- 92A - Cayenne (92A)) >> WM, 405019 Removing And Installing Front Wheel Bearing Housing (Wheel Carrier) >> Subsequent Work >> Subsequent Work For Removing And Installing Front Wheel Bearing Housing (Wheel Carrier)

Subsequent Work For Removing And Installing Front Wheel Bearing Housing (Wheel Carrier)

WARNING: This page is about a different car, the 2014 Porsche Cayenne, 2013 Porsche Cayenne, 2012 Porsche Cayenne, and 2011 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fit the wheel.

    > 440519 Removing and installing wheel - section on "INSTALLING "

  2. Fit the axle nut to the specified tightening torque.

    > Refer to the appropriate Tightening Torques For Front Axle service information

    Operate the brake whist doing so (2 mechanics required).

  3. Fit the hub cap.

    > 440519 Removing and installing wheel - section on "INSTALLING "

scientia non olet · About LEMON Manuals