LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Cayenne Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 86 (40 - Wheel Suspension Front Drive Shaft (4.8L Non Turbo) -- 92A - Cayenne (92A)) >> WM, 405019 Removing And Installing Front Wheel Bearing Housing (Wheel Carrier) >> Preliminary Work >> Preliminary Work For Removing And Installing Front Wheel Bearing Housing (Wheel Carrier)

Preliminary Work For Removing And Installing Front Wheel Bearing Housing (Wheel Carrier)

WARNING: This page is about a different car, the 2014 Porsche Cayenne, 2013 Porsche Cayenne, 2012 Porsche Cayenne, and 2011 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove hub cap using > 9229 - puller hook and loosen drive shaft mounting at the wheel side before raising the vehicle. Operate the brake whist doing so (second mechanic required).

    > 404119 Removing and installing front drive shaft - section on "REMOVING "

    G16329383Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Lock nut on drive shaft (shown as an example)

  2. Remove wheel.

    > 440519 Removing and installing wheel - section on "REMOVING "

scientia non olet · About LEMON Manuals