Removing Control Unit For Tyre Pressure Monitoring (TPM)

WARNING: This page is about a different car, the 2014 Porsche Cayenne, 2013 Porsche Cayenne, 2012 Porsche Cayenne, and 2011 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Installation position of TPM control unit

NOTE: Voltage peaks

Risk of damage to electrical load or to the control unit

Release electric plug connection -a- and pull it off -A- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Disconnecting plug connection
Screw off the two fastening nuts -1- and remove control unit from the holder.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Removing TPM control unit