Removing Front Level Sensor
WARNING: This page is about a different car, the 2014 Porsche Cayenne, 2013 Porsche Cayenne, 2012 Porsche Cayenne, and 2011 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
Information
- Some of the repair illustrations show only one side of the vehicle or a similar component.
- Naturally, some steps also have to be performed on the opposite side of the vehicle as well.
Information
- In running gear with level adjustment, a level sensor is installed on each spring strut.
- The level sensor is screwed to the body and upper control arm.
- Turn the steering as far as required until you have easy access to the level sensor.
- Loosen locking pin -1-
using a suitable tool -2-
and remove it from the holder -3-
(-A-
).
Removing level sensor holder
- Press holder -3- out of the upper trailing arm -4- (-B- ).
- Release electric plug connection -2-
(-a-
) and pull it off -A-
.
Removing sensor for levelling system
- Unscrew fastening screw -3- .
- Remove level sensor -1- and holder -4- .